Recent content by 41panelmark

Reposting for the summer season. First potential buyer could not come up with the all of money. 22k

1940 4 door Deluxe. Ford Yosemite Green. Nice driver. This is a stock car with the exception of 12 conversion, aluminum radiator, electric wipers and turn signals. This is a Colorado car, no rust. Restored 20+/- years ago. Starts, stops and runs well. Car cover, extra white-wall tires...

Klaxtonete push-type horn does not work, parts or restore, as-is $95 plus shipping.

This is an original 1940-47 Ford Pickup Steering Column Lock / Drop Bracket with key. OE/OEM Part Number: 01C-3676 OEM Interchange Part Number: 1941 1942 1946 half 1/2 1 ton pickup panel truck Manufacturer Part Number: 01C-3676 OEM genuine $200.00

Thanks and yes it is out of a 40 , not a helmet but has the 2 caps. I also thought about the washer. If there was to much back n forth could that cause some misfire issues? I did notice that the contact that runs on the rotor rides at the very end or edge of the brass surface when the shaft is...

How much endplay 59-a helmet distributor? With the distributor mounted to the engine I can move the shaft in and out about an 8th of an inch or more. This seems a bit excessive and could cause uneven gaps between the rotor and the cap contacts correct? What would be normal here? thanks in...

Thanks everyone, looks like I found a taker.

I am posting for a man here in the Denver area. He has 2 short blocks that he wants to give to someone but they need to be picked up this weekend. 292 and 312. If you want them send me a pm with your name and number and I will put you in touch. thanks.

My T was the first one that I ever saw, I then had many more including A,'s, AA's, T's and TT' before I was able to get the that T. Like HDowse I could not decide either so the T currently lives next to a 40, 4 door among others.

Thanks everyone. Here is what I found. I figured out what the problem was once I removed the panel and looked inside. Turns out that the small screw that holds the door handle on had come loose allowing the square stock to come out of the hole on the other end. So it was not stripped or...

Thank you. I will give it a shot. Not sure what I will find with the latch mechanism.

The handle on the passengers side door is malfunctioning and will not open the door. The handle inside works fine to open or lock. I need to access the inside of the door to see what is going on but I am not sure how the upholstery is held on and or comes off. Anyone know how to do this...

I did this some years back, if the rims are in good shape and not all rusty removal won't be to much of a pain. If the rubber is hard and or there is some rust you will likely need to break the bead with a sledge like this type and then work the ring off. Take care not to bend or damage the...

Agreed, the MTFCA site is a great place to get started. Post some photos here and there so we can see what you have.

Yes leave it.