Recent content by 37fordpickup

Brassworks

I have the pan but no deflector. Maybe hotcoupe could email me also wit ha pic jsnyder223@comcast.net

Would you like pictures of the hitch that came with my 37 1/2 ton pickup?

I am also restoring a 37 1/2 ton. I have the original radiator from mine which needs a new core and haven't been able to find a radiator shop within a reasonable distance to do the work. I bought a new radiator from Brassworks which is about 95%...

The cables to the drums makes it a 37 or 38.

Ask Brassworks if they have an "orphan" radiator. They had one for my 37 pickup which was very close and saved me over $500. I'm not trying to do a full restoration and someday I will find a radiator shop who can recore my original.

I painted my rims with a 2 part urethane and since I had paint left over, I also painted my running boards.

Thanks Randy

I'm getting ready to install new fuel lines on my '37 Pick up. I have a new fuel tank and it has been a few years since I removed the old lines. I would appreciate a few pictures which show the routing and location of the lines from the tank to the motor. I...

Let me know if you want to buy a radiator. It's been checked and I can send pics.

Thanks JSEERY

The drain on the bottom of the filter goes where? And the other runs from the back of the block at the pressure sending unit to the side of the filter? A good picture might help.

I've been looking every where to find information for the oil lines from the filter to to the port on the back of the block and from the bottom of the filter to a port at the intake. Size lines and fittings? This a 24 stud from 39 panel.

I had a tool made to pull them out. Also need heat and a hammer and fianlly drilled them out. Have pictures of the puller.

I finally got one of the old perch pins out today. All it takes is some heat, a drill, some more heat, penetrant, some more heat and a BFH!. The other might come out easier I hope.