Recent content by 37Ford

I need of a set of oversized +.080 Cam Bearings for a 59L Block. Thanks for any assistance. JR

Need a set of piston rings for 3-5/16 (3.313) Egge pistons with top and middle ring of 5/64 thickness and 3/16 oil ring. Hastings: 5075S125

Looking for a good Flathead block. Mine developed a non-reparable crack , so I need a replacement block. I would prefer a 1946-1948 (59) block, but I'll consider others with an original 3-3/16 bore. I'm in St. Louis and willing to travel a little if you have something good. Please no seized...

This might help

Will be building a new Blown engine. 3.312, 4-1/8 Scat stroker crank, running 5-6 lbs of boost. Can’t find any Ross metric ring pistons in the size needed. Talked with Ross today and they have castings done, but machining won’t be done for 6-8 weeks. Talked with Scat and they are now making...

It is definitely anti-freeze

1948 59ab flathead engine. Engine rebuilt 12 years ago, has run fine all this time, about 25,000 miles on engine. Was time for spring oil change. Normal coolant level. Checked oil and it was at normal height and oil was black on dip stick. Started engine and let it warm up, it ran fine. Loosened...

1948 59ab flathead engine. Engine rebuilt 12 years ago, has run fine all this time, about 25,000 miles on engine. Was time for spring oil change. Normal coolant level. Checked oil and it was at normal height and oil was black on dip stick. Started engine and let it warm up, it ran fine...

1158 6 volt Led bulb

1158 6 volt LEDs

I got mine from Bubbas Ignition.

I have used Bendix aircraft contacts (# 10-357174) in my HC.

286” in my 29 Roadster

On a 59ab engine; what is a safe depth for the bolt to extend into the block?

I would be interested in two when available.