Recent content by 34roadsterpickup

  1. 3

    1932/34 roadster pu stanchions

    Does anyone have a 1932/34 roadster pickup stanchions I could copy for my project?
  2. 3

    Slingshot manifold

    I have a 1938 stock flathead.It was rebuilt back to stock.I am putting an original Eldelbrock Slingshot manifold on it.I am not sure of the best carbs to put on it? What size jets? Any help would be appriciated.
  3. 3

    1934 roadster pickup

    Mike, Was there a lot of fabrication fot the 32 to fit the cowl.I am thinking of using the one piece Socal speed shop windshield.
  4. 3

    1934 roadster pickup

    Bruce, Did you use a 32 or 34 windshield? The winshield is the last thing to do on my truck. Peter
  5. 3

    1934 roadster pickup

    Did you use 32 or 34 winshield? Do you have any pictures? Peter
  6. 3

    1934 roadster pickup

    No I don't have the windshield posts.I think I will have a hard time locating one!
  7. 3

    1934 roadster pickup

    I have a 1934 roadster pickup cowl. Does anyone know if the car windshield will fit?
  8. 3

    Wanted...1933-34 rear

    Bill, I have a complete 33-34 stock rear end with 411's.Also have a complete front end. What are you building.I have some truck sheetmetal parts.(front fenders,cowl,grill and misc pieces)
  9. 3

    identify 1933/34 rearend ratios?

    Thank you for responding.I just started to take the rear end apart tonight.I will look to see if the 9-39 is stamped on the r/p.I just bought a set of 3.54 gears.My next project is to attemp to switch the gears.Any suggestions?
  10. 3

    1934 ford rearend with 4.33

    Thank for all the input.I just wanted to find out what it was before I took them apart.I have 4.11 in my roadster pick up know.I think I am going to install a set of 3.54 in it.When I take it apart I will let you know what I find.
  11. 3

    1934 ford rearend with 4.33

    Did they make a 1934 rearend with 4.33 gears? If so is there any marking to back it up?
  12. 3

    identify 1933/34 rearend ratios?

    I have a service handbook that shows a 4.33 optional gear . The 4.11 were standard. The book may be wrong or they are rare.
  13. 3

    identify 1933/34 rearend ratios?

    The rearend is out of a truck.BAsed on your information it is either a 33 or 34.I just tried countinh the revolutions. I think it either a 4-11 or 4-33.Maybe the 3-4 that is marked in the rib indicates 4-33's.
  14. 3

    identify 1933/34 rearend ratios?

    Could the rear end be a different year? It measures 50 1/2'' from the inside of both backing plates.The numbers i found were on the rib.
  15. 3

    edelbrock sling shot intake (old one)

    I have one just like that. I havent seen to many original ones.I read only about 100! The last one I saw sold for $2800.00.Good luck!
Back
Top