Recent content by 33cabriolet

A pair of F_1 shock mounts in excellent condition John 253 241 0228

a pair of F-1 shock mounts.they are in excellent condition

offenhauser 32-48 three carb. it has carbs air cleaners,linkage ,fuel lines. the center carb.has a tuneup kit installed the end carbs need tuneup kits. John 253 241 0228

this is probably the engine used in Hyster fork lifts the model it was used in was H60H. look up Hyster on the net this should give the info. you need. John

if the carb ices again just pull over and let the heat from the engine melt the ice ,hood on would help too. John

I need the trim ring for a 33 dash John

I need the bezel around a 33 dash John 253 241 0228

clutch is dragging binding syncro rings,adjustment is off or pressure plate is dragging

replace,if another tooth breaks it can jam and push the bottom of the case out.John

I just tell them that it is just a little more than they have. It really pisses them off

try a 55-62 chevy yoke it works in 48-52 f-1

I have a NOS shaft and gear,42 "long.I want $250 plus frt. John 253 241 0228

Don't use a fuse on the headlight circuit a, circuit breaker will come back on and give a chance to get stopped. on a dark road it is a real awaking if the lights don't come back on.

I have a truck tail light,I want $30 and I will ship it. John 253 241 0228

A 2" hole saw will cut a hole a little larger than 2" most of the holes are right at 2/16" or a half round file will enlarge the hole to fit the gauge. John