Recent content by 29FordGuy

I first thought mine was steel also so I tried to polish it up and .... oops, what is that yellow stuff coming through? Sure enough, it is brass way down inside! Since mine was dented up pretty bad and they are very hard to find in good condition, I chose to fill in the dents and paint over...

And we can not forget the plank road that crossed the Algadones sand dunes in southern California. My dad told me of travelling across that in the 20's before the paved road was built later that decade. We have come a long way in building roads for our wheels!

I am sure that in 1903 an "improved" road referred to a macadam road or similar. A macadam at that time consisted of graded, broken rock placed in layers to properly drain moisture and distribute the load from the carriage wheels (horseless or otherwise). The surface was typically compacted...

I wanted to update this thread with my latest success. I tried the magnet trick using the only magnets I had around. I first tried an old AlNiCo magnet from a coin vending machine but it was too big and ran into the housing. Then I went down to Radio Shack and bought some ceramic magnets but...

Wow, that is impressive. Quite a collection of junk. I know mine only has the one screw and lock washer. I just hope mine is resting quietly on the bottom where I can pick it up with a magnet. I don't want to drive it until I get the thing out!

Hey guys, thanks for all the helpful suggestions. I will do the magnet on the flywheel trick later this week. Looks so easy and I have some strong magnets that should work good. The video was especially helpful Bob, thanks.

Thanks, I will try that. I do remember seeing some recently but I don't remember seeing any 'how to' advise. I will do search. I installed a new original and kept the old one for a spare (with new bolts and lock tabs installed). I remember reading several threads about the modern type that...

Well, my original Bendix threw a bolt and it is now at the bottom of the bell housing. It has for the most part laid there quietly but recently I have had a few loud clunks that sounded like it was beginning to travel around in there. I need to get it out before it does damage to the flywheel...

The black acrylic is available at art stores. It comes in a small ~2 oz plastic bottle. Just a lit'l dab'll do ya.

Josh, I was in on that thread awhile back. It was started January 28. Search for "Town Sedan window moulding". Here is the procedure I used and listed in that thread. Thanks. I think I remember how I did it. 1. Spray on primer 2. Spray on Burgundy color enamel (I used Ace Premium enamel)...

There you go .... I never considered that! I would like to try pinstriping by hand on my car trailer I just got so will keep that in mind. Might be worth a try. That is interesting about Henry and the pinstripers. Is is really true? BTW your pinstriping you did on your car is beautiful...

I seriously considered doing the pinstriping myself - getting the right brush and practice, practice, practice, but decided to try the tape and was very pleased. The key I think is removing the tape very soon after applying the paint so that the edge rounds. I do not think it is awful looking...

Well I asked my friend about his front seat since he did not drive it to the picnic and to my surprise he said he had a tudor. My mistake. Sorry for the delay in getting back to you (had to find the old thread). Hope you can figure it out. Good luck!

I got mine at TCP Global ... http://www.tcpglobal.com/pinstriperdepot/psdfinesse.aspx They also have paint, brushes and whatever else you may need. I did not have any luck locally but I live in a very small town. You could also do your curves by using 3M fine line tape. It is flexible and...

I used the Finesse on my town sedan and think it really looks nice. The important point is to remove the tape right away before it dries so that the edge rounds over and is not so sharp. As for the gas tank design, I tried a couple of times but could not get a good curve on the corners. The...