water pump no more

[fiddlybits]

Why doesn't my water pump work anymore?

It is the correct color.

Let the analysis begin.........

 

[Tim Armstrong]

I think that it is broken.

 

[fiddlybits]

A little JB Weld and that will buff right out... ... ...

 

[hardtimes]

Why doesn't my water pump work anymore?

It is the correct color.

Let the analysis begin.........

Plain to see, as someone shot it dead with .45 cal hootycryser ! Probably mistaked it for dinner/squirrel Heck looks like a green spurrile to me !

 

[Goldhardt]

How in the world did you do that???

 

[fiddlybits]

How in the world did you do that???

I'll let you know later tonight. . . For now... letting the game continue for a while.

 

[eagle]

I'd say you used it as a lifting point for the motor...?

 

[Mitch//pa]

you cut it in half to remove the pump and fan easier

 

[Big hammer]

In the oven baking and someone walk across the floor to hard

 

[Larry Jenkins]

It must have been talkin' to your Dissie.. It too has a split shaft..

Larry

 

[TinCup]

I am with Mitch you must have had a 4 blade fan and it was easier to get the pump out this way.

 

[Jerry in Shasta]

Are those .45cal. longs in the back ground? Should have use a .22, to much power.

 

[darrylkmc]

Looks like you didn't allow the paint to fully cure

 

[RUNNERBUN]

I suspect the wife came home and found it baking in he kitchen oven. After she used up the 5 bullets (she's a poor shot) You are still alive. She got so cranky she hit you over the head with it.

 

[WestCoast]

I didn't know they came as an assembly kit, you got the directions?

 

[BILL WILLIAMSON]

Did you have a jack under it to loosen the head?
Bill W.

 

[WestCoast]

Bill, I think he used a left hand hammer on a right hand pump

 

[Mike V. Florida]

Loosing a blade will do that.

 

[Tiny]

Looks like fresh paint. Did you drop it?

 

[40 Deluxe]

Another coat of paint would have held it together. Next time don't be so cheap!